Structural dependence of microwave dielectric properties of spinel structured Mg2(Ti1-xSnx)O4 solid solutions: Crystal structure refinement,Raman spectra study and complex chemical bond theory

Mg₂(Ti_1-xSn_x)O₄ (x?=?0–1) ceramics were prepared through conventional solid-state method. This paper focused on the dependence of microwave dielectric properties on crystal structural characteristics via crystal structure refinement, Raman spectra study and complex chemical bond theory. XRD spectrums delineated the phase information of a spinel structure, and structural characteristic of these compositions were achieved with the help of Rietveld refinements. Raman spectrums were used to depict the correlations between vibrational phonon modes and dielectric properties. The variation of permittivity is ascribed to the Mg₂(Ti_1-xSn_x)O₄ average bond covalency. The relationship among the B-site octahedral bond energy, tetrahedral bond energy and temperature coefficient are discussed by defining on the change rate of bond energy and the contribution rate of octahedral bond energy. The quality factor is affected by systematic total lattice energy, and the research of XPS patterns illustrated that oxygen vacancies can be effectively restrained in rich oxygen sintering process. Obviously, the microwave dielectric properties of Mg₂(Ti_1-xSn_x)O₄ compounds were obtained (${\epsilon }_r$= 12.18, $Q\times f$?=?170,130?GHz, ${\tau }_f$?=??53.1?ppm/°C, x?=?0.2).     

High birefringence photonic bandgap fiber with elliptical air holes

In this paper, we proposed a high birefringence photonic bandgap fiber (PBGF) with elliptical air holes in cladding and circular air hole in core. The forbidden gaps of the honeycomb structure are calculated when the circular air holes are deformed to the elliptical shape. And the birefringence of the PBGFs is investigated by using a full-vector finite element method (FEM) and the numerical results are presented.     

OPAH a model for optimal design of multipurpose small hydropower plants

The investment in small hydropower plants requires the analysis of hydrological, technical, operational, budgetary, economical and financial aspects. The analysis of each possible configuration demands the joint action of several technicians, consuming substantial time and money. During initial design of the project, simplified procedures are usually adopted which may compromise the quality of the base configuration.In this paper we will present a global overview of the OPAH model, which was developed to surpass these limitations. This global model performs the optimization of project configuration. This model uses non-linear programming optimization to analyze the multipurpose operation of the hydropower plant. It uses a numeric simulation model of unsteady flow under pressure to analyze the hydraulic circuit. It uses an economical and financial simulation model that takes in to account the project risk associated to hydrologic and market variability, the financial capacity of the investor and the fiscal aspects.     

The influence of Johnson–Cook material constants on finite element simulation of machining of AISI 316L steel

In literature, five different sets of work material constants used in the Johnson–Cook's (J–C) constitutive equation are implemented in a numerical model to describe the behaviour of AISI 316L steel. The aim of this research is to study the effects of five different sets of material constants of the J–C constitutive equation in finite-element modelling of orthogonal cutting of AISI 316L on the experimental and predicted cutting forces, chip morphology, temperature distributions and residual stresses. Several experimental equipments were used to estimate the experimental results, such as piezoelectric dynamometer for cutting forces measurements, thermal imaging system for temperature measurements and X-ray diffraction technique for residual stresses determination on the machined surfaces; while an elastic–viscoplastic FEM formulation was implemented to predict the local and global variables involved in this research. It has been observed that all the considered process output and, in particular the residual stresses are very sensitive to the J–C's material constants.     

Electrochemical characteristics of heme proteins in hydroxyethylcellulose film

A stable film made from hydroxyethylcellulose (HEC) on pyrolytic graphite (PG) electrode was employed for incorporating hemoglobin (Hb), myoglobin (Mb) and horseradish peroxidase (HRP), and the electrochemical characteristics of the proteins were studied correspondingly. Experimental results revealed that HEC film could greatly accelerate electron transfer between the proteins and electrode, and the proteins showed a thin layer electrochemical behavior in the film. Moreover, all the proteins in the film exhibited good catalytic activity towards the reduction of hydrogen peroxide (H₂O₂) in the low H₂O₂ concentration range. In the high concentration range, H₂O₂ would exhibit toxicity effect on the proteins. The electrochemical properties and electrocatalytic abilities of the three heme proteins in HEC film have been compared, and the optimal conditions for H₂O₂ biosensor fabrication have been obtained.     

Towards a more efficient energy use in photovoltaic powered products

This paper analyzes the energy saving and power management solutions necessary to improve the energy consumption efficiency in photovoltaic powered products. Important in the design of such products is not only the energy supply optimization required to deliver the actual energy to fulfil their function, but also efficient energy transfer along the energy chain. In this paper, several methods to improve the efficiency of the energy chain are described. This includes an analysis of optimization methods for photovoltaic powered products, its functional system and product use.     

An efficient face segmentation algorithm based on binary partition tree

This paper presents an efficient face segmentation algorithm based on binary partition tree. Skin-like regions are first obtained by integrating the results of pixel classification and watershed segmentation. Facial features are extracted by the techniques of valley detection and entropic thresholding, and are used to refine the skin-like regions. In order to segment the facial regions from the skin-like regions, a novel region merging algorithm is proposed by considering the impact of the common border ratio between adjacent regions, and the binary partition tree is used to represent the whole region merging process. Then the facial likeness of each node in the binary partition tree is evaluated using a set of fuzzy membership functions devised for a number of facial primitives of geometrical, elliptical and facial features. Finally, an efficient algorithm of node selecting in the binary partition tree is proposed for the final face segmentation, which can exactly segment the faces without any underlying assumption. The performance of the proposed face segmentation algorithm is demonstrated by experimental results carried out on a variety of images in different scenarios.     

Radio resource management for a mobile network with TD-CDMA

In the paper, we proposed a resource allocation method employing maximal compatible cliques to make use of channel bandwidth as efficiently as possible in a TD-CDMA system. Furthermore, the strength of beacon signals was also measured to decide whether or not to reserve resources for hand-off users, in order to reduce their dropping probabilities. Finally, we conducted several experiments to validate that our method could make use of the finite resources efficiently, thereby revealing better blocking probabilities and dropping probabilities than other methods.     

基于统计阈值的Snort规则集动态产生的设计与实现

Snort作为开源的入侵检测系统,利用定义的静态规则集合实现对网络的入侵事件的检测。本文分析入侵检测系统的基本原理和模型,阐述Snort入侵检测系统部署到网络时,其静态规则集的配置方法,根据统计流量阈值和告警频率阈值动态产生动态规则集的方法,改进并提高了部署Snort应有的灵活性。     

Design of composite data acquisition gateway based on 5G network

The integrated data collection system hasn't changed much over the years. Their growth is dominated by digital filtering, and they get a new avionics bus. Time division multiplexing is still used to communicate with the system's data collector. These schemes make use of commands and data buses. While this method works, it has many drawbacks. These shortcomings are overwhelming the strict system architecture, system bandwidth limits, and expertise to only obtain an avionics bus, otherwise system bandwidth and one-way flow of data and control. This lead for high-end video recorders. To quietly monitor our actions and valuable information provides important warnings. However, it is usually completed by a device with this small processing power, which tracks the device, stores the data of the user's data, and is limited in processing. Therefore, it is important to store and process user data in the cloud to track 5 G network activity. This article proposes a simple 5G network gateway solution for custom user monitoring equipment. Collects charge data on Network 5G and Charging-aware multi-mode based routing protocol (CMRP). The CMRP routing mechanism is not yet stable, but the changes depend on the state of the energy charge sensor. This cannot be complemented by energy-efficient sensors and routing protocols that consume less energy.